Products Show

Location:Home > Products > Network PA System > Four Channel Rack-Mounted Network Terminal
Four Channel Rack-Mounted Network Terminal
左滚动
  • Four Channel Rack-Mounted Network Terminal
右滚动
  • AXT8709
  • Four Channel Rack-Mounted Network Terminal
● The device is a network PA terminal with single-channel audio output.
● It adopts a dual network redundancy design and is capable of working on different network segments.
● It may be deployed anywhere with network access.
● It supports a maximum 48 kHz sampling rate and 16-bit digital audio stream decoding.
● 10M/100M adaptive networking
● The device provides DC 24V/100MA output and short-circuits output under simultaneous control.
● It can play the background music, emergency calls, and warning signals from the system controller
● The device provides one EMC audio input and one EMC audio output.
● Audio Terminal Local volume is controllable.
Description
AXT8709 network four-channel audio output terminal is a TCP/IP based full digital analog-digital conversion signal processor, with dual network redundancy design and may be deployed anywhere with network access.   The AXT8709 4-channel network audio terminal is a network fully digital analog-digital conversion signal processor based on TCP/IP transmission protocol, which adopts the dual network interface redundancy design, and can be coupled at any place with access to network. The remote audio data stream can output the audio signal through the machine with intelligent control of the host machine; one emergency audio input interface is used to connect the emergency signal of the fire center, and one emergency audio output interface is used to connect the emergency power amplifier; local control is not required, and it can be used after remote configuration through the management software.

Specification


Item

Indicator

EMC 

(EMC LINE IN)

Rated output of CH1, CH2, CH3, CH4

1V

Input sensitivity

MAX

4V

MIN

250mV

Effective frequency range of gain limit (±3dB)

20Hz-20kHz

SNR (low pass 30kHz)

≥70dB

THD (1kHz, 1/3 output voltage)

≤0.1%

EMC LINK OUT

Equal to EMC LINE IN (±10%)

Input dynamic range

≥26dB

Network decoding (MP3 IN)

Rated output of CH1, CH2, CH3, CH4

1V

Distortion (1kHz -10dB/MP3)

≤0.2%

Effective frequency range of gain limit (±3dB)

50Hz—20kHz

SNR (low pass 30kHz)

≥70dB

Alarm OUT (controlled by the host software)

COM-24V OUT

24V, with total output current of 1A. (For example, under 24V, single channel can output at 1A, while 4 channels can only output at 250mA simultaneously.)

COM-SC OUT

Short circuit ()

Built-in monitor power

1W

Network

Dual network ports, 10M/100M

Power

AC 220V/50Hz

Static power

8W

Rated power

9.5W

Package size (L×W×H mm)

555×360×120

Machine size (L×W×H mm)

483×273×44

Net weight

3.3kg

Gross weight

4kg